The Phoenix Testlab EMC laboratory is constantly adapted to the latest technology and has been optimally designed to meet the specific EMC test requirements of the offshore and shipbuilding sector.
Shipbuilding/offshore
Accreditation/certification
Accreditations:
DIN EN ISO/IEC 17025:2018
Certifications:
DIN EN ISO 9001:2015 and
DIN EN ISO 14001:2015
Recognition: Federal Maritime Shipping and Hydrography Authority
Phoenix Testlab works with the most influential classification societies, such as ABS (USA), BV (F), DNV, LR (GB), PRS (PL), NK (JP), and RINA (I) and performs EMC tests according to their requirements. If your device meets the requirements of your selected classification society, it is then certified by this society.
Typical Standards for the applications listed above
- EN 60945 (navigation and radio communication devices)
- EN 55016 (noise emission phenomena)
- EN 61000-4-2 (ESD)
- EN 61000-4-3 (radiated noise immunity)
- EN 61000-4-4 (burst)
- EN 61000-4-5 (surge)
- EN 61000-4-6 (high frequency, asymmetrical)
- EN 61000-4-11 (voltage dips)
- All standards of the above classification societies
EMC test laboratory equipment
- Six anechoic chambers
- Measuring paths of 3 m/5 m
- Emission measurement up to 110 GHz
- Field generation (industry) up to 40 V/m (up to 6 GHz)
- Field generation (automotive) up to 600 V/m (up to 18 GHz)
- Open area test site with up to 10 m measuring path
- Conducted noise emission and noise immunity in the shielded chamber
- Noise emission of the network harmonics for single/three-phase dev. up to 32 A
- Noise immunity to network harmonics for single/three-phase dev. up to 32 A
- Ring wave tests up to 7.8 kV
- Surge tests up to 7.4 kV
- Burst tests up to 4.8 kV
- ESD tests up to 30 kV, even under constant climate
- Vehicle pulse test sites
- Bulk Current Injection (BCI)
- Stripline, Triplate, TEM cell
- Fiber optic interfaces for various bus systems
- Standardized measuring procedure for recording analog measured values
- Simulators for GSM, UMTS, LTE, Bluetooth®, DECT and GPS
- Acoustic analyzers
Monitoring media equipment
- Reproducible constructions on pre-assembled mounting systems
- Standardized measuring procedure for recording analog and digital measured values
- Optical speed detection system
- System for measuring illuminance
- Optical probes
- Pneumatic finger for pneumatic actuation of buttons
Your contact
