Automotive

Phoenix Testlab is a modern EMC test laboratory for electronic components that are used in motor vehicles. As a result of many years of experience and a high degree of specialization, we are your reliable partner. A dedicated team testing automotive components ensures the high quality of tests.

Accreditation/certification

Accreditations: DIN EN ISO/IEC 17025:2018
Certifications: DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015

Our laboratories are from the Kraftfahrtbundesamt (KBA, Federal Motor Transport Authority)) as a technical service (category A and / or B as well as D) with regard to the e / E marking for the UNECE legal acts named:

UNECE-R10 (06 series of amendments), EMC for electrical / electronic sub-assemblies and complete vehicles (EMC)
UNECE-R100 (02 series of amendments) Part II, Rechargeable Energy Storage System (REESS)
VO (EU) 2016/1788 (Annex XV, Parts 3 - 8), EMC for electrical / electronic sub-assemblies and complete vehicles (LoF)
2009/19 / EG (Annexes VII - X) according to VO (EU) 661/2009, EMC for electrical / electronic sub-assemblies and complete vehicles

Typical Standards for the applications listed above

International Standards:

ISO 11452-1 to -9, Immunity Tests
ISO 10605 Test of Immunity to Electrostatic Discharge
ISO 7637-1 to -3, Conducted and coupled Interferences
ISO 16750-1 and -2, Electrical Tests
ISO 14982, Agricultural and forestry machines
CISPR 25, Measurement of radiated and conducted Emissions

German OEM´s:

TL 81000 and VW 80000, Requirements of Volkswagen AG
GS 95002 and GS95003, Requirements of BMW
MBN 10284, Requirements of Mercedes-Benz
LV124, Electrical Requirements

International OEM´s:

FMC 1278, Requirements of Ford
GMW 3097 und GMW 3172, Requirements of General Motors
JLR-EMC-CS, Requirements of Jaguar/Land Rover
CS.00244, Requirements of Stellantis
28401NDS02, Requirements of Nissan
B21 7110, Requirements of Peugeot - Citroen
36-00-808, Requirements of Renault
VOLVO Car and Truck Requirements
MESPW67602D, Requirements of Mazda

Others:

Relevant manufacturer specific Requirements for Agricultural machines as well as Construction machinery
and much more

EMC test laboratory equipment

Many anechoic chambers
- Measuring paths of 3 m/5 m
- Emission measurement up to 110 GHz
- Field generation (industry) up to 40 V/m (up to 6 GHz)
- Field generation (automotive) up to 600 V/m (up to 18 GHz)
Conducted noise emission and noise immunity in the shielded chamber
Noise emission of the network harmonics for single/three-phase dev. up to 32 A
Noise immunity to network harmonics for single/three-phase dev. up to 32 A
Ring wave tests up to 7.8 kV
Surge tests up to 7.2 kV
Burst tests up to 4.4 kV
ESD tests up to 30 kV, even under constant climate
Vehicle pulse test sites
Bulk Current Injection (BCI)
Stripline, Triplate, TEM cell
Fiber optic interfaces for various bus systems
Standardized measuring procedure for recording analog measured values
Simulators for GSM, UMTS, LTE, Bluetooth®, DECT and GPS
Acoustic analyzers