Backgroundimage

Shipbuilding/offshore - EMC

The Phoenix Testlab EMC laboratory is constantly adapted to the latest technology and has been optimally designed to meet the specific EMC test requirements of the offshore and shipbuilding sector.

Accreditation/certification

Accreditations: DIN EN ISO/IEC 17025:2018
Certifications: DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015
Recognition: Federal Maritime Shipping and Hydrography Authority, Lloyd´s Register, DNV (Det Norske Veritas), Sublab for the USCG (US Coast Guard) regarding to tests for balast water management systems

Phoenix Testlab works with the most influential classification societies, such as DDNV (Det Norske Veritas), ABS (American Bureau of Shipping), BV (Bureau Veritas), LR (Lloyds Register), PRS (Polski Rejestr Statków), NK (Nippon Kaiji Kyōkai) and RINA (Registro Italiano Navale) and performs EMC tests according to their requirements. If your device meets the requirements of your selected classification society, it is then certified by this society.

For more information, click here

Typical Standards for the applications listed above
  • DIN EN 60945 (navigation and radio communication devices)
  • CISPR 16-1 (noise emission phenomena)
  • DIN EN 61000-4-2 (ESD)
  • DIN EN 61000-4-3 (radiated noise immunity)
  • EN 61000-4-4 (burst)
  • DIN EN 61000-4-5 (surge)
  • DIN EN 61000-4-6 (high frequency, asymmetrical)
  • ISO 694 and IEC 61000-4-8
  • DIN EN 61000-4-11 (voltage dips)
EMC test laboratory equipment
  • Five anechoic chambers
    • Measuring paths of 3 m/5 m
    • Emission measurement up to 110 GHz
    • Field generation up to 40 V/m (up to 6 GHz)
  • Outdoor measurement site with up to 10 m measuring path
  • Conducted noise emission and noise immunity in the shielded chamber
  • Noise emission of the network harmonics for single and three-phase devices up to 32 A
  • Ring wave tests up to 7.8 kV
  • Surge tests up to 7.4 kV
  • Burst tests up to 4.8 kV
  • ESD tests up to 30 kV
Monitoring media equipment
  • Reproducible constructions on pre-assembled mounting systems
  • Standardized measuring procedure for recording analog measured values