Information technology - environmental simulation
Phoenix Testlab is accredited for all relevant standards of the Low Voltage Directive 2014/35 / EC in the field of information technology.
Environmental simulation tests, such as temperature and climatic tests, vibration, corrosion and much more. complement the range of services so that all regulatory and manufacturer-specific test requirements can be carried out and further developed.
Accreditation/certification
Accreditations:
DIN EN ISO/IEC 17025:2018
Certifications:
DIN EN ISO 9001:2015 and
DIN EN ISO 14001:2015
Typical Standards for the applications listed above
Mechanical tests
- DIN EN 60068-2-53 (combined climatic (temperature / humidity) and
dynamic (vibration / shock) tests
- DIN EN 60068-2-6 / -27 / -64 (oscillation, sinusoidal / shock / broadband noise)
Temperature tests
- DIN EN 60068-2-1 / -2 (cold / dry heat)
- DIN EN 60068-2-14 (temperature change)
Climatic tests
- DIN EN 60068-2-30 (damp heat, cyclical)
- DIN EN 60068-2-38 (temperature / humidity, cyclical)
- DIN EN 60068-2-74 (damp heat, constant)
Corrosion tests
- DIN EN 60068-2-11 (salt mist)
- DIN EN 60068-2-52 (salt spray, cyclical)
- DIN EN 60068-2-60 (mixed / harmful gas)
Protection classes (IP code)
- DIN EN 60529 (degrees of protection through housing)
- ISO 20653 (road vehicles - degrees of protection)
Environmental simulationd laboratory equipment
Electrodynamic vibration test systems from 20 kN to 300 kN, with temperature or climate overlay
- Vibration test systems with and without slide table
- Various clamping devices: Headexpander, cube, H-piece etc.
- Additional storage to enlarge the clamping area for large parts
- Max. Temperature range: - 70 ° C to + 180 ° C
- Humidity range: between 10% and 95% rel. F.
Construction (bench design)
- Fixture construction / fixture adjustments
- 2D construction / 3D design
- CAD simulation (optional)
Temperature and climatic chamber from 0.3 m³ to 25 m³
- Max. Temperature range: - 70 ° C to + 180 ° C
- possible rel. Humidity 20% to 98%
- Options: Sun simulation, corrosive gas, condensation, special tests according to various manufacturer specifications (on request)
Temperature shock chambers
- Air-air, over 120 l / 500 l to 7 m³ (air humidity on request)
- Temperature shock with splash water (optional: with / without Arizona dust)
- Temperature shock diving
Corrosion change chambers 0.5 m³ to 11 m³
- Option: special tests according to various manufacturer specifications (e.g. Nissan, Ford, VW Group, VDA, etc.)
IP protection class test (ISO 20653, optionally DIN EN 60529)
- Foreign body and contact protection: IP 1X to IP 4X (1st code number)
- Dust test: IP 5KX to IP 6KX (1st code number)
- Water protection: IP X1 to IP X8 and IP X4K, IPx6K and X9K (2nd code number)
- Special tests on request
Acoustics
- Sound power measurement or Squeak & Rattle in a half-space of quality class 1
Surface tests
- Testing of decorative and functional surfaces
- Determination of hardness, abrasion resistance, color, gloss and adhesion
- Determination of the burning behavior of materials used in motor vehicle interiors
- Chemical tests: resistance to reagents
Electrical tests
- according to customer specifications and / or technical standards
Monitoring systems for test item monitoring and control
- Measurement data acquisition and evaluation of customer-specific specifications
- multi-channel imprint of specific current profiles
- automat. Test stands for the actuation of mechanical components
- and much more
Monitoring systems
- For controlling and monitoring of test samples e.g. resistance-monitoring by micro-cut, automatic button-pushing systems, electrical charging & loading systems
- Standardized measurement procedures for recording analog measurements
- Automatic optical monitoring systems
- Monitoring of digital signals e.g. CAN, LIN, Ethernet, RS232
- Simulator of GPS signal
